Sails

Update Your Reefing

by Duncan Kent, Posted January 30, 2013

Traditionally, all sailboat mainsails were reefed by simply pulling down the reefing lines through cringles in the luff and leech of the mainsail, then securing the reefing pennants—often permanently attached to the mainsail—to the boom to tidy the sail up.

Sails and Sailhandling Systems

by Sail Staff, Posted January 11, 2013

Six experts weigh in on the best ways to improve a boat’s sails and sailhandling systems.

Tension aloft

by Chip Lawson, Posted August 18, 2009

Whether you’re cruising or racing, an adjustable backstay is a helpful device for changing sail shape and controlling forestay tension for improved upwind and downwind performance. By dialing in the right backstay tension you can increase boatspeed. Regardless of whether you have a masthead or fractional rig, using an adjustable backstay is essential to good sail shape. While

Adjustable genoa car retrofit

by Peter Nielsen, Posted August 24, 2009

Dragonfly is a sweet 1983 Bristol 35.5, based in Marblehead, Massachusetts. She still sports most of her original deck gear and the old Merriman genoa lead cars and tracks, while still functional, had seen better days. Owner Tim Sheehy sails shorthanded and wants to get the best performance out of his new suit of North sails, so he decided to upgrade to Lewmar sliding bolt track and

Backstay Tensioner

by Peter Nielsen, Posted January 27, 2010

Easy Upgrades: #1 of a seriesEvery fractionally rigged boat will have (or should have) a means of adjusting backstay tension. Its main purpose is to flatten and depower the mainsail in stronger winds, putting off the time at which a reef will be required. Because very few masthead-rigged boats are provided with backstay adjusters, cruising sailors regard them with the

Cockpit Control

by Peter Nielsen, Posted July 29, 2010

If you are one of the many thousands of sailors who own a boat built before lines-led-aft became ubiquitous, and you want to be able to sail your boat without leaving the cockpit, leading halyards and reefing lines aft can be a relatively easy upgrade

Replacing Your Lifelines

by Peter Nielsen, Posted July 29, 2010

When we acquired our “new” boat I saw at a glance that the plastic-sheathed lifelines were junk. Not only were they too thin–she had been used only for racing, so I guess the wire was underspecified to save a few pounds – but they were all too obviously old and dangerously corroded. I once saw a friend fall overboard because a rusty lifeline gave way, so I knew I would replace them as soon as

Lash Down Your Deck Gear

by Adam Cort, Posted April 12, 2011

Stainless steel tie-down fittings from Accon Marine ensure that loose gear on deck stays in place, keeping things safe and well organized when underway.The fittings are available in a large size (3.5in by 3.5in) and a small size (2in by 2in). These two sizes can be used for securing a wide range of items, including everything from scuba gear to fenders. Each tie-down is comprised of