Advertisement

Design and Technology

Sailmaking in the Nevada Desert

Sailmaking ain’t what it used to be, especially out in the Nevada desert Some years ago I visited the Bavaria factory and was amused at

Video: Build a Boat in 2 Minutes

Seeing certainly appears to be believing when it comes to the Reverso skiff. Marketed by Red Beard Sailing here in the United States, the little

100 Years of One-designs

Photo courtesy of Bill Clausen/Lightning Class Who doesn’t love one-designs? Not only do these boats arguably represent competitive sailing in its purest form, they also represent

Foiling Monohull Design

Examining Vendée Globe boats on the dock in Les Sables d’Olonne prior to the start of the race last November, one thing was perfectly clear:

Hanse’s Innovative Rudder Drive System

In Hanse’s innovative Rudder Drive system, a Torqeedo electric motor embedded in the boat’s rudder provides propulsion. The system will make its debut on the

Boat Decks: Teak vs Synthetic Teak

One of the most eye-catching boats at the Newport boat show last fall, the Scandinavian Cruiser 20, is a fast daysailer with a narrow hull and a traditional teak deck. At least it looked like teak. As I was checking out the SC20, something about those decks struck me as being a little off. Then it hit me: they looked too good, too clean to be real. The fact that I had to ask to make sure they

Comparing Design Ratios

When buying a boat, consider how its ratios compare with those of similar boats in its category.

Chart Plotting in the Digital World

When upgrading your boat’s electronics, you need to consider which electronic charts are available and supported by the various chartplotter manufacturers. The major multifunction displays

0001-ALV_150521_ross_1625-Amory-Ross

Photographer: Amory Ross

Where you’ve seen his work: Onboard photography and video during four editions of The Ocean Race Ross grew up in New Jersey and says he

Photo Courtesy of SailGP

SailGP in NYC

The foiling grand prix fleet made a stop in New York this week, but tricky conditions on Saturday left some out of the racing. Still, the home team moved up the leaderboard and a few notable names joined the racers. 

The mold for the new prototype is prepped at JPS Production in La Trinité-sur-Mer, France. Photo courtesy of Peter Gibbons-Neff

A Better Build

Take a look inside the build process of a foiling Classe Mini 6.50 as Peter Gibbons-Neff gears up for a second go at the Mini Transat.

Photo: Sharon Green

Photographer: Sharon Green

Where you’ve seen her work: the iconic Transpac photography at Diamond Head light, The Ultimate Sailing Calendar Sharon Green’s photography career began suddenly and with

Advertisement
Advertisement