Most boats today have a single permanently hoisted headsail with a roller-reefing unit on the headstay. This arrangement works well, but becomes problematic when there is more wind than the sail on the furler can handle.
Nothing will ruin your cruise faster than a damaged or torn sail. With the BoatWorks sail-repair kit on board, you’ll be able to make emergency repairs and keep on sailing. Ours cost less than $100 to assemble but could save us hundreds in repair bills.
Sometimes you have to pass through complexity on the road to simplicity, as one sailor found while rethinking his sail-handling systems.
After cruisers tested and perfected furler systems about 30 years ago, they were widely adopted on certain types of raceboats. Since then, however, there’s been an interesting reverb effect, in which offshore racers have created ever more refined and versatile furling technologies that are now trickling back into the cruising community.
One of the great ironies of sailing is that as hard as it can be to get your mainsail up, it can often be just as hard to get it back down. This goes double when tucking in a reef with a slab-reefing system—one reason why so many sailors are willing to sacrifice sailing performance for the sake of in-boom or in-mast furling.
Because friction makes you work harder and harms your boat’s performance, it pays to take a long, hard look around your boat to see where and how you can make it function as smoothly as possible.
Near the end of the 2010 boating season I noticed that the old Profurl roller-furling unit on my Tanton 39 cutter Lunacy was no longer working properly. The furler, which probably dates back to the early 1990s, was getting increasingly difficult to use.
I love the fact that an old boat can give you as much sailing pleasure as an expensive new one. The only proviso for me is that the sail handling systems be absolutely top-notch. Replacing hardware like mainsheet travelers, genoa lead cars, boom vangs and lead blocks with new, low-friction gear will repay you many times over in ease of handling and improved efficiency.A case in point was a
If you are one of the many thousands of sailors who own a boat built before lines-led-aft became ubiquitous, and you want to be able to sail your boat without leaving the cockpit, leading halyards and reefing lines aft can be a relatively easy upgrade
Easy Upgrades: #1 of a seriesEvery fractionally rigged boat will have (or should have) a means of adjusting backstay tension. Its main purpose is to flatten and depower the mainsail in stronger winds, putting off the time at which a reef will be required. Because very few masthead-rigged boats are provided with backstay adjusters, cruising sailors regard them with the
The Laser was a little worse for wear. It was an old one, a little too heavy with chips and gouges that left the fiberglass
The foiling grand prix fleet made a stop in New York this week, but tricky conditions on Saturday left some out of the racing. Still, the home team moved up the leaderboard and a few notable names joined the racers.
Take a look inside the build process of a foiling Classe Mini 6.50 as Peter Gibbons-Neff gears up for a second go at the Mini Transat.
In praise of the Melges 15, a class that has grown to prominence in recent years, and for good reason.
Where you’ve seen her work: the iconic Transpac photography at Diamond Head light, The Ultimate Sailing Calendar Sharon Green’s photography career began suddenly and with
How and why to make your next adventure a trip aboard Other People’s Boats.
Sailing the “Standing Mast Route” Through The Netherlands
When it comes to managing a blow, reefing is just one part of the equation.
The Marine Mammal Advisory Group (MMAG) needs your help with compiling data about collisions and other encounters at sea. Click here to review the reporting
In part one of our series on yachting’s most iconic photographers, Onne van der Wal offers insight and advice from his storied career.
