How to: Deck Repair with Plywood and Epoxy Resin
August 25, 2016
On many boats, decks are cored with end-grain balsa or plywood with a fiberglass laminate on each side. It’s not unusual for moisture to find
On many boats, decks are cored with end-grain balsa or plywood with a fiberglass laminate on each side. It’s not unusual for moisture to find
Is your fuel gauge inaccurate? Is it no longer working at all? This is a common problem on older boats, but is easy to fix.
Before choosing which inflatable dinghy is right for you, there are many factors to consider Some sailors claim that the inflatable boat has killed the
Mast rake is the angle at which a mast slopes aft from vertical as viewed from the side. In the rare event that a mast
Q: I’ve just bought a sailboat that’s been sitting unattended for a couple of years. The docklines, sheets and furling line are green with algae
ZINCS EMERGENCY Q: I need advice. All of a sudden I’m burning through zincs while at dock. My gut instinct says that there is a
BASHED-UP BOW PULPIT Q: The bow pulpit on my old 34-footer has seen more than its share of abuse over the years, and now it’s
DIFFERENT TACKS, DIFFERENT PERFORMANCE Q: What may be the reason that my boat exhibits different behavior depending on whether I am sailing on starboard or
LOOSE DEPTH CONNECTION Q: The LCD readout on my boat showing bottom depth has become intermittent. When I pulled apart the nav station panel, it
HOLDING TANK PUMP-OUT FREQUENCY Q: How long can I go between holding tank pump-outs? I can see it being over two weeks easily between uses
A friendly club boat with serious potential.
The lure of early-season boating is a beast with two heads.
A new four part docuseries details the Maxi Edmond de Rothschild campaign to defend the Route du Rhum title, available now on Youtube.
Eight Bells: Charlie Dalin
A fleet-footed foiler that everyone will want to take for a spin.
Where you’ve seen his work: Onboard photography and video during four editions of The Ocean Race Ross grew up in New Jersey and says he
The Laser was a little worse for wear. It was an old one, a little too heavy with chips and gouges that left the fiberglass
The foiling grand prix fleet made a stop in New York this week, but tricky conditions on Saturday left some out of the racing. Still, the home team moved up the leaderboard and a few notable names joined the racers.
Take a look inside the build process of a foiling Classe Mini 6.50 as Peter Gibbons-Neff gears up for a second go at the Mini Transat.
In praise of the Melges 15, a class that has grown to prominence in recent years, and for good reason.
