Sails

Sailors are a conservative lot. The sea takes no prisoners, and most people don’t care to experiment when the cost of failure is potentially great. That’s why both futuristic and some older traditional sailing rigs struggle for acceptance and often receive little more than patronizing smiles from so-called modern mariners.Ironically, the conventional marconi rig that now dominates sailing

Sailors are a conservative lot. The sea takes no prisoners, and most people don’t care to experiment when the cost of failure is potentially great. That’s why both futuristic and some older traditional sailing rigs struggle for acceptance and often receive little more than patronizing smiles from so-called modern mariners.Ironically, the conventional marconi rig that now dominates sailing

Recently, a sailmaker called to inquire about upgrading the backstay system on his client’s mid-1980s 34-foot masthead-rigged sloop. The client was buying a slightly larger headsail that could cover a broader spectrum of wind ranges and thought that the standard backstay and turnbuckle just weren’t up to the task. The working range of the turnbuckle was 2 to 3 inches of length, and the time

I’m a real fan of downwind sails because they add a lot of speed and fun. On my 40-footer I carry a 1.5-ounce symmetric spinnaker in a sock, a 75-ounce asymmetric, also in a sock, that I set on a collar around the headstay, and a 2.2-ounce Code 0 that I have mounted on a Harken furler. I use the symmetric when I have a good crew but leave it ashore when I’m sailing shorthanded. The Code 0 is

Sailors have been tying knots for millennia, and no doubt innovators have been trying just as long to invent both stronger rope and better knots. Yet the basic problem still remains: Every rope is weakened when its fibers are bent. Loading a knot with a large amount of weight creates a sheer force on the fibers; given enough force, the fibers break and the rope fails. Today’s

Simply hoping that your rig is trouble free is not a good strategy, says Chris LabYou need to keep up to date on the condition of your standing and running rigging, both before you launch in the spring and continually throughout the season. Your rig is an integrated system, and anything that happens to any part of it can quickly turn your sailboat into a slow-moving

Making sailboats easier to handle (“Sailing for Geezers,” September 2007) apparently touched a responsive chord. Here are more improvements I’ve made on my 30-year-old Pearson 40 to make it easier and safer for me to handle. Since I’m approaching 60 years of age, easier also equals fun. The Geezer mainsail reefStaying in the cockpit when the wind is building is a

Castaway gets a new sparFor the last two years we’ve been involved in the full refit of Castaway, a 1978 Ericson 34T. We recapped the story of this BoatWorks Bailout project in the January issue, and now the boat is at last in the water. Any old-boat project runs into some kinks, and we hit a literal kink with Castaway when the mast was found to be so badly

Call me old-fashioned, call me daring, call me crazy, but I prefer not to have my cockpit full of lines that have been led aft. I enjoy going forward and working at the mast. It hasn’t always been that way. During my first crossing from Isla Mujeres, Mexico, to the Dry Tortugas off Florida many years ago as crew on an Irwin 38, each trip forward was a crawl on my hands and knees. Oh, how I

Windage and drag are two of a racing sailboat’s worst enemies, especially around a sail’s leech. Many racers eschew in situ reefing lines until it’s absolutely necessary to reef. (Some cruisers also don’t use reefing lines, as they can chafe sailcloth.) The risk is that you can get caught out if you’re not careful. A smarter, faster way to reef without leaving reefing lines in